Description
6.6 FT Sliding Barn Door Hardware Set (Basic “J”)
Maximum Door Panel Width – 40″
Door Weight Capacity – 200 lbs
Fits 1-3/8″ to 1-3/4″ for Door Thickness
- 2 × 3.3 FT Rails: Rails come with pre-drilled holes of 16-inch spacing. Rail is made of solid 1/4″ thick carbon steel, finished with a highly durable powder coating. Fit door panel width: 36″-40″.
- 5 × Rail Spacers & Lag Bolts: With lag bolts and the spacers, it is used to connect the rail on the wall.
- 2 × Hangers: The strap of the hanger is made of 1/4″ thick carbon steel and the wheel is made of duty nylon, very durable and smooth. Fit door panel thickness: 1 3/8″ and 1 3/4″.
- 2 × Door Stoppers: Door stoppers slide along the rail and tighten down at any point to stop your doors anywhere you want, and they’re cushioned by rubber caps for a quiet close.
- Floor Guide: Mark the centerline of overlap and place the center of the floor guide in line. Slide the door closed and secure the floor guide.
- 2 × Anti-Jump Discs: Fasten anti-jump discs to the top of the door by placing them at least 1″ from the edge of the door.
** Barn Door is NOT included, track hardware ONLY
